TriggerTech Legacy Special ACE Trigger Glock Gen 1-5, red
379,00€
Ex Tax: 308,13€ · price incl. VAT
The ACE trigger system from Canadian maker TriggerTech is built from three separate modules — the lever module, the sear module (with CLKR™) and the disconnect module in the backplate. Replacing the one-piece factory Glock connector removes the drag inherent to the stock design.
Pull weight is set with a screw anywhere between 2.5 and 6 lb. Zero Creep™ removes pre-travel creep, so the trigger breaks cleanly with a short reset. The safety mechanism is decoupled from the frame, so frame tolerances do not affect how it works. The backplate has a relief pocket giving extra striker clearance under shock.
USPSA approved and permitted in IPSC Standard, Optics and Open divisions.
The Legacy Special keeps the OEM-style blade safety in the trigger face, so it handles just like the factory Glock trigger. It is the only one of the two with published drop-test results — the manufacturer states it passed SAAMI protocols with a wide margin at 3.5 lb, and considers it suitable for everyday carry at that setting. Below 3.5 lb it is range and competition only.
Red blade.
Specifications
| Platform | Glock standard frame Gen 1–5*, 9×19 mm and .40 S&W |
| Compatible models | 17, 17L, 19, 19x, 22, 23, 24, 26, 27, 34, 35, 45, 47 |
| Trigger action | two stage |
| Lever type | flat straight |
| Pull weight | adjustable 2.5 – 6 lb |
| Safety | OEM-style blade safety |
| Zero Creep™ | yes |
| TKR technology | yes |
| CLKR technology | yes (pull weight adjustment screw) |
| Hand | ambidextrous |
| Intended use | range and competition; at 3.5 lb also suitable for carry |
| Warranty | lifetime |
| Country of origin | Canada |
In the box: ACE trigger system (3 modules), light + heavy lever take-up springs, light safety plunger spring, pin tool, 5/64″ Allen key.
* Glock Gen 5 requires removal of a small tab on the frame — see the supplied instructions. Gen 6 is not supported.