FOXcam WiFi trail camera

FREE 16GB SD card + set of alkaline batteries.

The FOXcam WiFi trail camera comes with an interesting and unique way of complete remote control. Using WiFi technology, you can configure the device and view recordings remotely without giving away the camera's position or spreading your scent. The FOXcam Wifi is the result of the gradual development of the Forester and Unka models and, in addition to its unique feature, offers the option of recording 3-minute videos or, with rapid fire, capturing up to 10 consecutive shots. All the features have been integrated into a compact body measuring 12.5 x 9.4 x 5.4cm, which eliminates all the shortcomings of small trail cameras while offering many advantages. The result is a trail camera with extremely high LOWglow night-shooting performance and a large 2.4" LCD screen on which photos can be magnified up to 16x and viewed comfortably. A great advantage is the power supply from 8x AA batteries, which ensure a long life of up to 12 months in standby mode. At the front there is a loop for a security lock with a diameter of 5 to 8mm. The device can be secured with a PIN code.

• Modes: photo + video
• Trigger time: photo < 0.6 sec. / video < 1 sec.
• Photo sequence: 1-10
• Video length: 5 - 180 sec.
  
• WiFi: yes, with a direct range of 25m
• GSM gateway: no
• 3G / GPRS (sending to e-mail): no
• Sound recording: yes
• Memory: SD card (up to 64 GB)
• Invisible illumination: yes
• Illumination brightness adjustment: no
• Illumination unit type: LED 940nm + 850nm
• IR illumination / flash: 30m
  
• Image sensor: 5-megapixel CMOS sensor
• Photo resolution: 5 / 14 / 30 MPx
  
• Lens: Fresnel lens - 7.36mm, F = 2.8mm / FOV (angle of view) = 55°
• Video recording: SuperHD / 640 x 360; 1280 x 720; 1920 x 1080; 1728 x 1296 pixels
• PIR sensor detection range: max. 25m at 25 °C
• PIR sensor sensitivity: 4 levels - high; normal; low; auto
• PIR sensor delay: 1 sec. - 60 min.
  
• Remote control: no
• Dual timer: yes
• Time stamp: yes, shown on the recording
• Power supply: 8x AA batteries or external DC 6V / 1.5A source
  
• Battery life: up to 1 year depending on shooting frequency
• Water resistance: IP67
• Dimensions: 94 x 54 x 125mm (length x width x height)

FOXmove: a patented technology that puts FOXcam trail cameras far ahead of the competition. According to tests, the camera is able to capture 30 - 60% more photos than ordinary, more expensive trail cameras, minimizing possible losses that could arise from an unsuitable choice of trail camera.

FOXraw: a patented technology for processing the image from the raw data of the CMOS chip, giving the final photo the right contrast, depth and gamut. Competing trail cameras use universal common algorithms that ultimately produce an ordinary image. FOXraw minimizes noise in night scenes and, given sufficient light, creates amazing daytime photos with maximum depth of field and color. For night scenes, the camera's automatic mode sets a sufficiently fast exposure that minimizes motion blur. You will appreciate this function especially when guarding property. The night scene is rendered along a curve, without overexposure even at short distance, using a sufficiently fast exposure = minimized motion blur.

High-quality night photos: the WIFI model excels with very high-quality night photos thanks to a powerful LED array consisting of 48 LEDs with a wavelength of 940nm, able to illuminate a night scene up to 30m. The camera is equipped with additional 850nm illumination, creating extremely powerful LOWglow night illumination.

Industrial controls and easy setup: the WIFI has a full ergonomic keypad with which you can control the camera without any problems. Install a set of batteries and an SD card. Switch the camera to the SETUP position, where it can be configured. Set the date and time and the camera mode (whether it should record video or take photos). The last step is setting the PIR sensor delay. Now switch to the OFF position and then to the ON position. The camera starts working and will record according to the settings.

LCD screen: allows you to view images and offers up to 16x image magnification directly on the 2.4" (6.1cm) display.

Compact dimensions: make this trail camera truly unique. The requirement was to develop the smallest possible trail camera with the best performance at an unbeatable price. Small trail cameras usually have more shortcomings, including weak power supply (usually only 4x AA batteries), weak illumination, etc. The FOXcam WIFI offers a small size, power from 8x AA batteries, strong performance, all necessary functions and a well-thought-out design with the option of securing the camera with a cable lock.

Perfect camouflage: carefully chosen to suit the European temperate zone.

Unrivaled PIR sensor detection range: the multi-zone detection area of FOXmove technology achieves greater selectivity and extends the detection distance by up to 34%.

Wifi Point: a mobile app for Android and iOS, also available in Slovak. Thanks to this feature you can browse, control, download, delete, take photos + video and aim the trail camera via your smartphone. Of course, manual control directly on the device remains unchanged.